Valid H35-460 Exam Q&A PDF H35-460 Dump is Ready (Updated 221 Questions)
Exam Questions and Answers for H35-460 Study Guide
NEW QUESTION 63
The same frequency neighbor in the gNodeB station only needs to execute the MML command ADD RCELLRELATIOG to add.
- A. False
- B. True
Answer: B
NEW QUESTION 64
What configuration modules does gNodeB wireless data configuration include?
- A. Configure adjacencies
- B. Configure sectors
- C. Configure the antenna
- D. Configure the cell
Answer: A,B,D
NEW QUESTION 65
The CPE Pro admin page supports multiple users logging in at the same time.
- A. Correct
- B. Errors
Answer: A
NEW QUESTION 66
What is the vision of IMT-2020 for the peak rate of 5G networks?
- A. 10Gbps
- B. 100lMbps
- C. 1Gbps
- D. 100Gbps
Answer: A
NEW QUESTION 67
What is the broadcast period of MIB messages in NR?
- A. 80ms
- B. 20ms
- C. 160ms
- D. 40ms
Answer: D
NEW QUESTION 68
Which MML command is used to bind the physical sector of the gNodeB to the radio AAU?
- A. ADD NRLOCELL
- B. ADD NRCELL
- C. ADD SECTOR
- D. ADD SECTOREOM
Answer: D
NEW QUESTION 69
When using CPE to perform single-station verification tests on NR networks, it is recommended to bring a portable one
- A. Correct
- B. Errors
Answer: A
NEW QUESTION 70
gNodeB station intra-frequency neighboring area only need to execute the MML command ADD RCELLRELATIOG to add.
- A. False
- B. True
Answer: B
NEW QUESTION 71
If a CPE Pro device forgets its password, how long can I press the reset button on the near end to perform a factory reset?
- A. 20s
- B. 4s
- C. 12s
- D. 8s
Answer: D
NEW QUESTION 72
When the NodeB automatically obtains an IP address through DHCP, which of the following message information is involved?
- A. DHKPACK
- B. DHCPOFFER
- C. DHCPDISCOVER
- D. DHCPREQUEST
Answer: A,B,C,D
NEW QUESTION 73
When NSA selects and interprets the 2.6Ghz band networking, the uplink and downlink decoupling scheme can not be used.
- A. Correct
- B. Errors
Answer: A
NEW QUESTION 74
Where is the downlink data distribution in the NSA architecture implemented?
- A. PDCP layer
- B. RLC layer
- C. MAC layer
- D. Physical layer
Answer: A
NEW QUESTION 75
What are the negotiation parameters that the NodeB needs to obtain when adding a remote maintenance channel? (Multiple choice)
- A. Local business IP address
- B. The local end maintains an IP address.
- C. Next hop IP address
- D. Network management maintains IP address
Answer: B,C,D
NEW QUESTION 76
Which of the following two cells has a relatively large PBCH interference?
- A. PCI0 and PCI2
- B. PCI0 and PCI1
- C. PCI0 and PCI3
- D. PCI0 and PCI4
Answer: D
NEW QUESTION 77
Which is the largest MIMO method supported by the 5G Indoor CPE design?
- A. 4T4R
- B. 2T4R
- C. 2T2R
- D. 4T8R
Answer: A
NEW QUESTION 78
Which module is used to monitor the power environment in the base station power system?
- A. ATS
- B. PMU
- C. BDU
- D. PSU
Answer: B
NEW QUESTION 79
Which description is wrong about the twist line test on the U2000?
- A. Typical configuration scenario for the command is 2T2R sector
- B. It is recommended that the standing wave ratio be less than 2.5, otherwise the judgment accuracy will be affected.
- C. Belonging to high risk order
- D. Applicable to multiple RRU cells
Answer: D
NEW QUESTION 80
Multimode fiber is recommended when the CPRI fiber connection between the BBU and RRU is over 150 meters.
- A. True
- B. False
Answer: B
NEW QUESTION 81
In the scenario of the Option 3 series of the NSA network, the gNodeB needs to be configured with the S1-C interface.
- A. True
- B. False
Answer: B
NEW QUESTION 82
......
Certification dumps - HCIA-5G H35-460 guides - 100% valid: https://getfreedumps.passreview.com/H35-460-exam-questions.html