Pass EMC D-PCR-DY-01 PDF Dumps | Recently Updated 214 Questions
Updated Test Engine to Practice D-PCR-DY-01 Dumps & Practice Exam
NEW QUESTION # 21
A company has been hit by a ransomware attack. How does PowerProtect Cyber Recovery ensure the safety of their critical backups?
Response:
- A. By encrypting the entire backup
- B. By immediately restoring from the last recovery point
- C. By isolating the backup in an air-gapped environment
- D. By storing the backup in a cloud system
Answer: C
NEW QUESTION # 22
When CyberSense detects an anomaly during a backup, what is the first action that should be taken?
Response:
- A. Run a manual system scan
- B. Delete the detected files
- C. Restore the backup immediately
- D. Isolate the affected files
Answer: D
NEW QUESTION # 23
After upgrading the Cyber Recovery software on Azure, a job fails due to insufficient memory resources. What step should have been taken prior to the upgrade?
Response:
- A. Verify available virtual machine resources
- B. Disable firewalls
- C. Reconfigure all network settings
- D. Check for user permission changes
Answer: A
NEW QUESTION # 24
When installing the Cyber Recovery virtual appliance, it's essential to ensure:
Response:
- A. The appliance is connected to an external hard drive
- B. It's installed on a standalone server
- C. Adequate virtual machine resources are allocated
- D. The appliance is compatible with all operating systems
Answer: C
NEW QUESTION # 25
DRAG DROP
Put the following steps in the correct order to back up the Index Engines CyberSense configuration files:
Answer:
Explanation:
Explanation:
NEW QUESTION # 26
When planning storage for PowerProtect Cyber Recovery, what is a key factor?
Response:
- A. Allocating storage for both primary and backup systems
- B. Ensuring that backups are stored with reduced redundancy
- C. Storing all backups in the same location as the production data
- D. Performing full backups without incremental backups
Answer: A
NEW QUESTION # 27
You are tasked with defining security protocols for your Cyber Recovery Vault. What configuration should be implemented first to enhance security?
Response:
- A. Enable real-time data analytics
- B. Set up Multi-Factor Authentication (MFA)
- C. Install cloud backup software
- D. Configure direct internet access for the vault
Answer: B
NEW QUESTION # 28
What is the main purpose of configuring sandboxes in PowerProtect Cyber Recovery?
Response:
- A. For testing and validating data recovery processes in an isolated environment
- B. To enhance the aesthetic appeal of the system's UI
- C. To reduce the amount of physical storage needed
- D. To provide a playful user interface for administrators
Answer: A
NEW QUESTION # 29
Which two aspects of storage design are crucial for a scalable PowerProtect Cyber Recovery solution?
(Choose two)
Response:
- A. Encryption at rest
- B. Public network access
- C. Deduplication
- D. High availability
Answer: C,D
NEW QUESTION # 30
What two steps are essential when installing the Cyber Recovery virtual appliance?
(Choose two)
Response:
- A. Connect the appliance to an external hard drive
- B. Ensure sufficient CPU and memory resources
- C. Verify compatibility with existing cloud services
- D. Install the appliance on every virtual machine
Answer: B,C
NEW QUESTION # 31
Which security feature is essential for protecting PowerProtect Cyber Recovery administration activities?
Response:
- A. Data deduplication
- B. Access to storage arrays
- C. Multi-Factor Authentication (MFA)
- D. Secure vault isolation
Answer: C
NEW QUESTION # 32
Which tasks can be performed using the PowerProtect Cyber Recovery management tools?
(Choose two)
Response:
- A. Automating backup schedules
- B. Optimizing backup storage space
- C. Enhancing user interface performance
- D. Monitoring backup job success
Answer: A,D
NEW QUESTION # 33
Which application object is required in the Dell PowerProtect Cyber Recovery vault to perform data analysis for malware or anomalies?
- A. CyberSense
- B. Dell PowerProtect Data Manager
- C. Dell NetWorker
- D. Dell Avamar
Answer: A
Explanation:
CyberSense is the application object used in the Dell PowerProtect Cyber Recovery vault to perform data analysis, detecting malware or anomalies in protected data.
NEW QUESTION # 34
Which backup application in the PowerProtect Cyber Recovery vault requires vCenter server object for data recovery?
Response:
- A. NetWorker
- B. PowerProtect DD (Data Domain)
- C. PowerProtect Data Manager
- D. Avamar
Answer: C
NEW QUESTION # 35
Which critical alert status is displayed in the New Alerts tab in the CyberSense Analyze Dashboard?
Response:
- A. Closed
- B. Pending
- C. Completed
- D. New
Answer: B
NEW QUESTION # 36
DRAG DROP
When you install a vCenter Server in an on-premises Dell PowerProtect Cyber Recovery vault, you must register it with the PowerProtect Cyber Recovery software. Arrange the necessary steps in chronological order.
Answer:
Explanation:
NEW QUESTION # 37
When designing the vault environment for Cyber Recovery, which two storage considerations are critical?
(Choose two)
Response:
- A. High storage capacity
- B. Vault proximity to the production environment
- C. Compatibility with legacy operating systems
- D. Storage deduplication capabilities
Answer: A,D
NEW QUESTION # 38
A customer is unable to deploy the PowerProtect Cyber Recovery Virtual Appliance. Their system specifications are:
vCenter 7.0
4 CPUs
8 GB RAM
150 GB available storage
Why are they unable to deploy the virtual appliance?
Response:
- A. Memory constraint
- B. Insufficient disk space
- C. Insufficient CPU
- D. Incompatible vCenter environment
Answer: B
NEW QUESTION # 39
What is the main purpose of configuring schedule policies in PowerProtect Cyber Recovery?
Response:
- A. Monitoring virtual machines
- B. Defining recovery point objectives (RPOs)
- C. Automating the backup schedule
- D. Enhancing data encryption
Answer: C
NEW QUESTION # 40
What is used to confirm the CyberSense Server is ready for software install?
- A. CheckCyberSense.sh script
- B. CyberSense.sh script
- C. CheckEngine.sh script
- D. InspectEngine.sh script
Answer: C
Explanation:
The CheckEngine.sh script is used to verify that the CyberSense server meets all prerequisites and is ready for the software installation.
NEW QUESTION # 41
Match the following Cyber Recovery upgrade tasks with the environment:
Task
a) Verify virtual machine compatibility
b) Perform data backups
c) Upgrade network security protocols
d) Reconfigure role-based access
Environment
1) On-Premises
2) Cloud
3) vSphere
4) AWS
Response:
- A. a) - 3, b) - 1, c) - 4, d) - 2
- B. a) - 3, b) - 2, c) - 4, d) - 1
- C. a) - 4, b) - 1, c) - 3, d) - 2
- D. a) - 1, b) - 3, c) - 4, d) - 2
Answer: A
NEW QUESTION # 42
You have multiple Dell PowerProtect Data Domain integrated with a Dell PowerProtect Cyber Recovery host.
Connection is lost to one of the Data Domains.
Which two methods would a Cyber Recovery administrator use to find out about it? (Choose two.)
- A. In the Cyber Recovery GUI, the vault status will be changed to 'Degraded'.
- B. An alert notification will be sent out to the admin stating, 'Vault status is Unknown'.
- C. Alert 2035 will be generated stating 'An error was detected while attempting to communicate with the DD system'.
- D. In the Cyber Recovery GUI, the vault status will be changed to 'Unknown'.
Answer: C,D
Explanation:
Alert 2035 notifies the administrator of communication errors with a Data Domain system.
The Cyber Recovery GUI reflects this by changing the vault status to "Unknown," indicating loss of connection.
NEW QUESTION # 43
During the backup job, CyberSense detects a significant delay in policy execution time. What should the administrator investigate first?
Response:
- A. System resource allocation
- B. Encryption settings
- C. Firewall configurations
- D. Backup storage space
Answer: A
NEW QUESTION # 44
......
EMC D-PCR-DY-01 Dumps Cover Real Exam Questions: https://getfreedumps.passreview.com/D-PCR-DY-01-exam-questions.html