Latest [Mar 29, 2026] 100% Passing Guarantee - Brilliant E-S4CON-2505 Exam Questions PDF
E-S4CON-2505 Certification – Valid Exam Dumps Questions Study Guide! (Updated 42 Questions)
SAP E-S4CON-2505 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 23
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE MIG_DT_RUN is running In the Charts Control Center, you can see 400 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. There are 40 R3load processes used for copying and 40 R3load processes for table count verification.
- B. SUM is still running in uptime; the 40 defined R3load processes are considered.
- C. These are 40 pairs of R3load processes, so there are 80 R3load processes running
- D. Without table contents comparison, only 40 R3load processes are being started.
Answer: C
NEW QUESTION # 24
During a SUM run, you want to check if the PARCONV_UPG phase is still running property. Where can you find information about this? Note: There are 2 correct answers to this question.
- A. Check the latest log files in the SUM directory, subdirectory a bap, subdirectory tmp.
- B. Check for running R3load processes on the host where SUM is running
- C. Check for running R3trans processes on the host where SUM is running
- D. Check the running batch job via Job Overview (SM37).
Answer: A,D
NEW QUESTION # 25
Which preoperational steps must be performed for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.
- A. Uninstall SAP Fiori apps NO T released for SAP_UI 7.50.
- B. Delete client 066 (Early-Watch client).
- C. Perform the custom code adjustment.
- D. Install add-on SAP Gateway 7.50.
Answer: A,B
NEW QUESTION # 26
You are performing an SAP S/4HANA conversion. You are in the BIND PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column.
What does the Calculated level indicate for those software components?
- A. The SAP Support Packages contained in the upgrade media, calculated by the maintenance planner
- B. The SAP Support Packages in the download directory that are newer than the selected Support Package stack
- C. The SAP Support Packages of the Support Package stack, calculated by the maintenance planner
- D. The SAP Support Packages that will be bound to the conversion
Answer: B
NEW QUESTION # 27
You are running an SAP ECC system .
For which of the following activities does SUM allow you to use the near-Zero Downtime Maintenance (nZDM) capabilities? Note: There are 3 correct answers to this question.
- A. Use DMO for SUM.
- B. Perform an SAP S/4HANA conversion including DMO.
- C. Upgrade the SAP system.
- D. Perform an SAP S/4HANA conversion without DMO.
- E. Apply SAP Support Packages.
Answer: A,C,E
NEW QUESTION # 28
Which of the following are valid options to check the progress of an in place SUM DMO run? Note:
There are 2 correct answers to this question.
- A. Check the Charts Control Center in the SUM UL
- B. Check the log files written in the SUM directory, subdirectory a bap, subdirectory log
- C. Check the dump size of the database export in the SUM directory, subdirectory a bap, subdirectory load.
- D. Check logs for jobs starting with RSUPG SGEN in the SAP system.
Answer: A,B
NEW QUESTION # 29
During the upgrade of your development system, you run into the adjustment of non-dictionary objects, handled by transaction SPAAU. There you find programs that are shown in status "automatic adjustment" (green traffic light).
What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. SUM refuses to continue unless you have marked a transport request as modification adjustment transport.
- B. SUM continues with the next phase, and the coding of your modified objects are set to the new SAP standard.
- C. Before continuing with the next phase, SUM asks for a modification adjustment transport.
- D. SUM continues with the next phase and your modifications are kept as in the start release.
Answer: C
NEW QUESTION # 30
You are performing an SAP S/4HANA conversion, scenario strategy Standard, with DMOO as an in place migration. How does SUM transfer the data from the source database to the target database during the migration?
- A. Using R3load and network socket connection
- B. Using R3load and memory pipes
- C. Using work processes and network socket connection
- D. Using R3load and file transfer
Answer: B
NEW QUESTION # 31
You want to use the Custom Code Migration Work list via remote code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database?
- A. Apply the corresponding SAAP Note via the Note Assistant.
- B. Download it from the SAP Support Portal.
- C. Generate it by analyzing the specific custom code via RFC.
- D. Configure it within transaction ATC.
Answer: B
NEW QUESTION # 32
You are performing an in place SAP S/4HANA conversion including DMO.
What is the latest point in time when you can reset the procedure without losing business data?
- A. The start of the Execution roadmap step
- B. The end of the database migration
- C. The end of the business downtime
- D. The start of the business downtime
Answer: C
NEW QUESTION # 33
How does SUM recognize modification adjustment transports from predecessor systems?
- A. By searching for transport requests in DIR_TRANS, subdirectory "transport"
- B. By searching for transport requests that are assigned to project SAP ADJUST
- C. By searching for transport requests in file umodauto.lst
- D. By searching for transport requests named <sid>KO<number>
Answer: C
NEW QUESTION # 34
Which steps can SUM perform during an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.
- A. Database migration
- B. Software update
- C. Custom code analysis
- D. Unicode conversion
Answer: A,B
NEW QUESTION # 35
You performed a custom code check for an SAP S/4HANA conversion.
In which transactions can you review the results? Note: There are 2 correct answers to this question.
- A. ATC (ABAP Test Cockpit)
- B. SYCM (Simplification Database Content)
- C. SAT(Runtime Analysis)
- D. SE80 (Object Navigator)
Answer: A,D
NEW QUESTION # 36
You are performing an SAP S/4HANA conversion for your production system. This conversion project requires that certain business functions are switched on. Following SAP recommendations, how will you achieve this? Note: There are 2 correct answers to this question.
- A. Activate the required business functions in the switch framework from section S/4H_ALWAYS_ON_FUNCTIONS.
- B. During conversion, SUM delivers some business functions already activated.
- C. Import a transport request from the development system that contains the recording of the activation.
- D. Activate the required business functions manually in the production system.
Answer: B,C
NEW QUESTION # 37
You are performing an SAP S/4HANA conversion with DMO. You entered a specific number of R3load processes during the Extraction Roadmap step.
Where can you change this during the migration via the Utilities option of the SUM UI?? Note: There are 2 correct answers to this question.
- A. In DMO Migration Preparation
- B. In SUM Analysis
- C. In SUM Parameters
- D. In Process Control Center
Answer: C,D
NEW QUESTION # 38
You have selected "Standard" as scenario strategy in the SUM tool.
Which steps take place via the shadow instance? Note: There are 2 correct answers to this question.
- A. Modification adjustment (SPDD)
- B. Modification adjustment (SPAU)
- C. Activation of dictionary objects (ACT_UPG)
- D. Conversion of application tables (PARCONV_UPG)
Answer: A,C
NEW QUESTION # 39
......
E-S4CON-2505 are Available for Instant Access: https://getfreedumps.passreview.com/E-S4CON-2505-exam-questions.html