[Jul-2026] Get 100% Real Free Hybrid Cloud Administrator NS0-165 Sample Questions
Accurate NS0-165 Questions with Free and Fast Updates
NEW QUESTION # 57
What is the minimum number of HA pairs required for Epsilon to be automatically assigned?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 58
Which two storage efficiencies are enabled by default on NetApp AFF systems? (Choose two.)
- A. postprocess zero block detection
- B. Inline compression
- C. Inline deduplication
- D. postprocess compaction
Answer: B,C
NEW QUESTION # 59
Which ONTAP feature combines multiple writes into a single 4K block on the aggregate?
- A. Data compaction
- B. Aggregate-level deduplication
- C. Volume-level deduplication
- D. Data compression
Answer: A
NEW QUESTION # 60
Which system is recommended as a secondary system for SnapVault?
- A. DataFort
- B. NearStore VTL
- C. FAS with NearStore license
- D. IS1200
Answer: C
NEW QUESTION # 61
Which ONTAP feature allows the most efficient use of disk space for provisioning root aggregates?
- A. XCP
- B. XDP
- C. DDP
- D. ADP
Answer: D
NEW QUESTION # 62
An administrator is setting up a new FC infrastructure and is trying to zone a LUN. All SAN LIFs and igroups have been configured properly on the NetApp ONTAP cluster. When the administrator logs on to the FC switch, they are not able to see the WWPNs from the LIFs that were created. What needs to be configured on the FC switch to enable the WWPNs from the NetApp LIFs to be discovered on the switch?
- A. VSAN
- B. NPV
- C. ISL
- D. NPIV
Answer: D
Explanation:
NPIV must be enabled on the FC switch so that multiple virtual WWPNs associated with SAN LIFs can log in through a single physical FC port. This allows the switch to discover and display the WWPNs from the NetApp FC LIFs.
NEW QUESTION # 63
Which two policy settings enable a user to update an S3 bucket? (Choose two.)
- A. QoS policy
- B. Effect
- C. Actions
- D. Versioning
Answer: B,C
Explanation:
Updating an S3 bucket is controlled by S3 bucket policies. The Actions setting defines which operations, such as writing or modifying objects, are permitted. The Effect setting determines whether those actions are explicitly allowed, enabling the user to perform update operations on the bucket.
NEW QUESTION # 64
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)
- A. Create NTP entries.
- B. Create a cluster LIF.
- C. Create DNS entries.
- D. Create a data LIF.
- E. Create export policies.
Answer: A,C,D
Explanation:
Before creating an SMB server in an Active Domain controller, you must ensure that the cluster time and the time on the domain controllers of the domain to which the SMB server will belong matches to within five minutes. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-cifs-cg%2FGUID-5AE3CADE-5EF1-403B-A664-2DEA9F13B0C8.html
NEW QUESTION # 65
What must a NetApp ONTAP administrator create in a new SVM to allow an NFS client to access a FlexVol volume?
- A. a POSIX-style access control list
- B. an export policy rule
- C. an initiator group
- D. a qtree
Answer: B
Explanation:
An NFS client can access a FlexVol volume only if the volume is associated with an export policy that permits the client. Creating an export policy rule defines which clients are allowed access and what level of access they have, enabling NFS connectivity.
NEW QUESTION # 66
Which two supported methods would you use to restore data from a SnapVault for Net Backup Volume?
- A. Use the SnapRestore Data ONTAP service
- B. Use the snapvault restore Data ONTAP command
- C. Use drag-and-drop technologies
- D. Use the Net Backup Administration Console
Answer: C,D
NEW QUESTION # 67
Which NetApp ONTAP feature guarantees that critical workload performance is not degraded by competing workloads?
- A. multipathing
- B. QoS
- C. quotas
- D. storage pool
Answer: B
Explanation:
Quality of Service allows administrators to control workload performance by defining minimum throughput guarantees and limits. This ensures that critical workloads receive the resources they require and are protected from performance degradation caused by competing workloads.
NEW QUESTION # 68
To restore a qtree protected with SnapVault from the secondary storage system to the primary storage system, you can ______________. (Choose two.)
- A. overwrite the existing qtree on the primary storage system with DOT 7.3
- B. restore to a non existing qtree, with DOT 7. 2
- C. delete the existing qtree from the secondary storage system with DOT 7.3
- D. add the new qtree to the primary storage system with DOT 7.2
Answer: A,B
NEW QUESTION # 69
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)
- A. XCP
- B. NKS
- C. FLI
- D. ADP
Answer: A,C
Explanation:
Migrate a series of LUNs from a third-party array to a FAS.
NEW QUESTION # 70
Which single interface allows administrators to manage NetApp ONTAP based systems that are installed in public and private clouds?
- A. NetApp Shift Toolkit
- B. NetApp Active IQ Digital Advisor
- C. NetApp Console
- D. NetApp ONTAP System Manager
Answer: C
Explanation:
NetApp Console provides a unified management interface for ONTAP-based systems across on- premises environments as well as public and private clouds, enabling centralized administration from a single interface.
NEW QUESTION # 71
Which one of the following /etc/snapmirror.conf entries will not support synchronous SnapMirror?
- A. FilerA: source_vol FilerB: destination_vol outstanding=3s sync
- B. FilerA: source_vol FilerB: destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
- C. FilerA:source_vol FilerB: destination_vol- sync
- D. FilerA: source_vol FilerB: destination_vol-0-55/5***
Answer: D
NEW QUESTION # 72
Which command disables client access to Snapshot copies on a volume called flexvol1?
- A. snap access flexvol1 off
- B. vol options flexvol1 nosnapdir on
- C. vol options flexvol1 snapdir off
- D. vol options flexvol1 snapdir on
- E. cifs shares-change flexvol1 -nosnap
Answer: B
NEW QUESTION # 73
Which one of the following statements apply to Advanced Single Instance Storage (ASIS)?
- A. Eliminates duplicates files in SnapVault for NetBackup secondary volumes
- B. Eliminates duplicates files in SnapVaultfor NetBackup source volumes Correct answers
- C. Eliminates duplicates blocks in SnapVault for NetBackup secondary volumes
- D. Eliminates duplicates blocks in SnapVaultfor NetBackup source volumes
Answer: C
NEW QUESTION # 74
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)
- A. The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.
- B. The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.
- C. The update history is available within the ONTAP System Manager interface.
- D. The latest available Images will appear In the ONTAP System Manager interface.
Answer: B,C
NEW QUESTION # 75
You want to enable the Internal ONTAP engine that quickly Identifies the file and directory differences between two Snapshot copies. In this scenario, which feature would accomplish this task?
- A. SnapCenter
- B. SnapLock
- C. SnapVault
- D. SnapDIff
Answer: D
NEW QUESTION # 76
Which NetApp technology groups SSDs and HDDs into a single aggregate?
- A. FlexVol
- B. Flash Cache
- C. Flash Pool
- D. FlexGroup
Answer: C
Explanation:
Flash Pool technology combines SSDs and HDDs within a single aggregate by using SSDs as a cache tier and HDDs as the capacity tier, improving performance while maintaining cost efficiency.
NEW QUESTION # 77
Your customer has a Windows user that must access a volume with UNIX security style permissions. What must be done to enable the Windows user to access the volume?
- A. The volume's security style must be changed to NTFS.
- B. The volume's security style must be changed to Mixed.
- C. A separate volume with an NTFS security style must be created.
- D. The Windows user must be mapped to a valid UNIX user.
Answer: B
NEW QUESTION # 78
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)
- A. You can convert the FlexVol volume to a FlexGroup volume.
- B. Use SnapMirror to replicate data from FlexVol to FlexGroup.
- C. Use XCP to copy data from a FlexVol to a FlexGroup.
- D. A FlexVol to FlexGroup conversion is not supported.
Answer: A,B
Explanation:
Starting with ONTAP 9.7, you can perform an in-place conversion of a FlexVol volume to a FlexGroup volume without requiring a data copy or additional disk space. Starting with ONTAP 9.7, you can convert standalone FlexVol volumes or FlexVol volumes that are in a SnapMirror relationship to FlexGroup volumes.
NEW QUESTION # 79
Which statement describes the results of the snapmirror resync command?
- A. Resynchronization finds the newest common snapshot shared by the two volumes or qtrees, and removes all newer information on the storage appliance on which the command is run.
- B. Resynchronization will update the snapshot on the source filer
- C. Resynchronization will cause the loss of all data written to the destination after the original base snapshot was made.
- D. Resynchronization will update the snapshot on the destination filer.
Answer: A
NEW QUESTION # 80
Which one of the following statements is not true of SnapLock volumes?
- A. SnapLock volumes support per-file retention periods.
- B. SnapLock volumes are supported on the gFiler appliance.
- C. SnapLock volumes support SnapMirror.
- D. There are two types of SnapLock volumes.
Answer: B
NEW QUESTION # 81
What is an indication that SnapMirror software is functioning properly?
- A. The peer cluster is unidentified.
- B. The SnapMirror relationship lag time is less than the update frequency.
- C. The SnapMirror relationship status is idle.
- D. The timestamps of the newest Snapshot copy and last export Snapshot copy differ.
Answer: B
Explanation:
When SnapMirror is operating correctly, updates are completing within the configured schedule.
A lag time that is less than the update frequency indicates that replication is keeping up and data is being transferred successfully without falling behind.
NEW QUESTION # 82
......
NS0-165 Study Guide Realistic Verified Dumps: https://getfreedumps.passreview.com/NS0-165-exam-questions.html