EMC D-NWG-DS-00 Test Engine Practice Test Questions, Exam Dumps
100% Free D-NWG-DS-00 Daily Practice Exam With 123 Questions
NEW QUESTION # 33
What is a standard deployment method for an L3 network?
Response:
- A. Device link detection protocol
- B. BGP neighborship
- C. Unidirectional link detection
- D. Link aggregation control protocol
Answer: B
NEW QUESTION # 34
Which tool is best suited for managing the budget and financial planning of a networking project?
Response:
- A. Financial Force
- B. FastList
- C. Unisphere
- D. Solve Online
Answer: A
NEW QUESTION # 35
What is the primary function of the Troubleshooting Template in network documentation?
Response:
- A. It records and tracks network issues and their resolutions
- B. It provides a detailed list of all VLANs and their configurations
- C. It manages software licensing for network devices
- D. It verifies network configurations after deployment
Answer: A
NEW QUESTION # 36
Which of the following tasks can be automated using FastScript in a networking project?
Response:
- A. Routing table updates
- B. VLAN configuration
- C. Device monitoring
- D. IP address assignment
Answer: A,B,D
NEW QUESTION # 37
What is a key reason for using templates during the network design documentation process?
Response:
- A. To dynamically assign IP addresses
- B. To reduce the time required for documenting repetitive tasks
- C. To replace the need for network monitoring tools
- D. To automate network configuration
Answer: B
NEW QUESTION # 38
What is the main function of CloudIQ in the planning and management of Dell PowerSwitch devices?
Response:
- A. Enables predictive analytics and performance monitoring
- B. Manages firewall rules and security policies
- C. Provides cloud-based storage for network configurations
- D. Provides licensing for PowerSwitch devices
Answer: A
NEW QUESTION # 39
Which type of template is most useful for documenting network pre-deployment configurations?
Response:
- A. Pre-Deployment Configuration Template
- B. VLAN Assignment Template
- C. Network Monitoring Template
- D. Post-Deployment Verification Template
Answer: A
NEW QUESTION # 40
Why is it important to involve deployment support during the installation of networking equipment?
Response:
- A. To handle network traffic monitoring
- B. To ensure that devices are properly configured and operational
- C. To create VLAN assignment tables
- D. To implement routing protocols
Answer: B
NEW QUESTION # 41
A customer PowerSwitch deployment requires additional TOR switches as part of the architecture. Which switch OS supports MLAG instead of VLT?
Response:
- A. NX-OS 7.3
- B. OS9
- C. OS6
- D. OS10
Answer: C
NEW QUESTION # 42
Which of the following is an essential part of deployment support to prevent downtime during the go-live phase?
Response:
- A. Scheduling system backups
- B. Implementing IP address restrictions
- C. Conducting a final network assessment
- D. Enabling traffic monitoring tools
Answer: C
NEW QUESTION # 43
An engineer is deploying and configuring an OS10 switch. They tried to resend the license to an internal email from the Digital Licensing and Fulfillment Portal. The subject line in received email shows the product name. There was no license that is attached to the email when the engineer opened the email. Why was the license not attached to the email that the engineer received?
Response:
- A. The account team must be involved to quote a new license first.
- B. The license should be sent from the DEE portal instead.
- C. The license can only be sent to the email address it was registered to.
- D. The license must be bound to a service tag before sending the email.
Answer: D
NEW QUESTION # 44
What type of information is typically included in a Pre-Deployment Configuration Template?
Response:
- A. IP addressing, device configurations, and security policies
- B. Network topology design
- C. Device firmware versions
- D. Network traffic patterns
Answer: A
NEW QUESTION # 45
What is the correct sequence in which calls are scheduled before a project is ready for deployment?
Response:
- A. Planning
- B. Planning
- C. Planning
- D. Handoff
Answer: D
NEW QUESTION # 46
Which lab environment is most commonly used for verifying the correctness of scripts generated by FastScript?
Response:
- A. EPS Tool
- B. Real-time Network Lab
- C. CloudIQ
- D. Simulation Lab
Answer: B
NEW QUESTION # 47
A customer wants to replace an existing third-party network with a Dell networking environment and redesign their environment to a modern architecture. What service meets the needs of the customer?
Response:
- A. ProDeploy Plus
- B. Custom SOW
- C. ProDeploy
- D. Additional Deployment Time
Answer: B
NEW QUESTION # 48
What are three design best practices when discussing the potential for a network replacement?
Response:
- A. Provide support for onsite replacement.
- B. Recommend the one-size-fits-all solutions in the Dell Portfolio.
- C. Review existing network configurations for Dell, Cisco, and HP switches.
- D. Document the replacement steps.
- E. Remove and decommission the hardware.
Answer: A,C,D
NEW QUESTION # 49
Which deployment support issue is most likely to occur during the installation of network devices?
Response:
- A. Incorrect routing protocols
- B. Mismatched cabling and connectivity issues
- C. IP address conflicts
- D. Software licensing expiration
Answer: B
NEW QUESTION # 50
Which of the following are key considerations during Layer 3 (L3) network planning?
Response:
- A. Network topology
- B. IP address allocation
- C. Routing protocols
- D. VLAN segmentation
Answer: A,B,C
NEW QUESTION # 51
Which is a limitation of FastList?
Response:
- A. Is not compatible with Microsoft Edge.
- B. Delay in loading is evident on substantial lists.
- C. It cannot be used with extensive lists.
Answer: B
NEW QUESTION # 52
Which of the following are key elements in Layer 3 (L3) network planning?
Response:
- A. MAC address table management
- B. IP addressing
- C. Subnetting
- D. Routing protocols
Answer: B,C,D
NEW QUESTION # 53
The scoping phase is primarily focused on defining __________, deliverables, and requirements to ensure alignment with business goals.
Response:
- A. Project scope
- B. Network configurations
- C. Performance metrics
- D. Hardware specifications
Answer: A
NEW QUESTION # 54
Which tool is typically used to support network deployment by providing detailed setup instructions?
Response:
- A. Solve Online
- B. CloudIQ
- C. PowerMax Manager
- D. FastScript
Answer: A
NEW QUESTION # 55
Which planning process is focused on ensuring the availability of licenses for networking devices?
Response:
- A. Layer 2 (L2) planning
- B. VLAN configuration
- C. VxRail SFS planning
- D. OS10 Licensing
Answer: D
NEW QUESTION # 56
......
Use Valid New D-NWG-DS-00 Test Notes & D-NWG-DS-00 Valid Exam Guide: https://getfreedumps.passreview.com/D-NWG-DS-00-exam-questions.html